Shure AD4QUS-A (New)
Price via quote
Axient Digital Quad Channel Wireless Receiver - G56 Band (470 - 636MHz)
Select Condition
Shure AD4QUS-A (New)
Axient Digital Quad Channel Wireless Receiver-G56Band(470-636MHz)
A 2018 NAMM Show TEC Award Winner!
Axient Digital defies limitations for both RF and audio quality. With industry-leading low latency, transparent frequency response, and wide dynamic range, Axient Digital lets nothing get in the way of true, pure sound. No matter the setting, you'll hear Shure audio quality you can count on.
Dual and quad receiver options open the gateway to the full range of features, from high-performance RF and transparent digital audio to software control. With Quadversity, the AD4Q can assign four antennas to a single channel for greater coverage and signal quality.
re workflow.
Features
Wide tuning range up to 184MHz
True digital diversity reception per channel for drop-out resistance
Networked control with Wireless Workbench and ShurePlus Channels app
Quadversity mode for extended antenna coverage and improved RF signal-to-noise
Front panel headphone jack enables Dante Cue and Dante Browse monitoring
Configurable Ethernet switch for redundant Dante digital output
Switchable XLR/AES3 outputs
Channel Quality meter displays RF signal-to-noise
Locking AC connectors
Optional DC module available to support redundant power
Audio Output
Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground), XLR: Transformer-Coupled Balanced (1=ground, 2=audio +, 3=audio -)
Impedance: Typical, XLR Line Out 100 Ω
Full Scale Output: 200 kΩ load, 1/4" (6.35 mm): +8 dBV, XLR (LINE setting): +18 dBV, XLR (MIC setting): -12 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection: Yes
Networking
Network Interface 10/100 Mbps, 1 Gbps, Dante Digital Audio
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)
Cascade Output
Connector Type: BNC
Note: For connection of one additional receiver in the same band
Configuration: Unbalanced, passive
Impedance: 50 Ω
Insertion Loss: 0 dB, typical
RF Input
Spurious Rejection: >80 dB, typical
Connector Type: BNC
Impedance: 50 Ω
Bias Voltage: 12-13.5 VDC, 150 mA maximium, per antenna, switchable on/off
Item Includes:
1x AD4Q Four--channel receiver (470-636 MHZ)
1x Locking power and jumper cables
1x BNC bulkhead adapter
1x Coaxial antenna
1x BNC cable assemblies
1x BNC cable
1x Ethernet cables
1x Rackmount kit
1x User guide
USER MANUAL
No user manual available for download