Studio Technologies model 204 (New)
Price via quote
Dante Compatible Announcers Console with One Dante Talkback Output
Select Condition
Studio Technologies model 204 (New)
The Studio Technologies Model 204 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The unit is housed in a compact, rugged steel enclosure that's intended for table-top use. Calling the Model 204 "cute" or "cool" would be accurate; its nicely proportioned but diminutive size makes it ideal for use in space-constrained locations. The Model 204 supports Dante® audio-over-Ethernet digital media technology with AES67 compatibility for integration into contemporary applications. The unit is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 204's audio quality is excellent, with low distortion, low noise, and ample headroom. Careful circuit design and rugged components ensure long, reliable operation.
Please Note! Model 4, Model 5 & Model 6 Announcers Consoles are all identical in their functionality with the exception of the additional Dante outputs per unit. Model 4 sports 1 Dante output, Model 5 sports 2 Dante outputs & Model 6 sports 3 Dante outputs.
Features:
Dante audio-over-Ethernet technology
Digital audio and direct-microphone outputs
One main and one talkback output channel
Highly-flexible 2-channel headphone output
Compact unit supports one on-air location
Excellent audio quality
Uses STcontroller for configuration
Power-over-Ethernet (PoE) powered
Features
Dante audio-over-Ethernet technology
Digital audio and direct-microphone outputs
One main and one talkback output channel
Highly-flexible 2-channel headphone output
Compact unit supports one on-air location
Excellent audio quality
Uses STcontroller for configuration
Power-over-Ethernet (PoE) powered
Power Source
Power-over-Ethernet (PoE): class 2 (low power, ≤6.49 watts)
Network Audio Technology
Type: Dante audio-over-Ethernet
AES67-2013 Support: yes
Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rate: 44.1 and 48 kHz
Number of Transmitter (Output) Channels: 2 (main, talkback)
Number of Receiver (Input) Channels: 4 (Headphone Ch1,
Headphone Ch2, Headphone Ch3, Headphone Ch4)
Dante Audio Flows: 4; 2 transmitter, 2 receiver
Network Interface
Type: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)
Microphone Input
Compatibility: dynamic or phantom-powered microphones
Type: balanced, capacitive coupled
Impedance: 2 k ohms, nominal
Gain: 35, 43, 52, 59 dB, selectable
Frequency Response: 25 Hz to 20 kHz, -3 dB
Distortion (THD+N): <0.022%, measured at 35 dB of gain
Dynamic Range: 96 dB, A-weighted
Phantom Power: P48 per IEC 61938 standard, on/off selectable with status LED
Compressor
Application: applies to Dante main and talkback transmitter (output) channels
Threshold: 1 dB above nominal level (-19 dBFS)
Slope: 2:1
Status LED: compressor active
Microphone Output
Type: passive via two 200 ohm resistors from microphone input (will pass phantom power in either direction)
Muting: solid-state relay contacts, 60 dB attenuation @ 1 kHz
Headphone Output
Type: 2-channel (stereo)
Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headphones, headsets, or earpieces with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 20 kHz, -2 dB
Distortion (THD+N): <0.002%
Dynamic Range: >100 dB
Remote Control Inputs: 2
Functions: mimics the action of the main and talkback button functions
Type: active low, 1 mA maximum, inputs pull up to 3.3 volts DC
Connectors
Microphone Input: 3-pin female XLR
Microphone Output: 3-pin male XLR
Headphone Output: 3-conductor ¼-inch jack
Remote Control Inputs: 3-conductor 3.5 mm jack
Ethernet: Neutrik etherCON RJ45
USB: type A receptacle (located inside Model 204's enclosure and used only for updating firmware)
Configuration
Requires Studio Technologies STcontroller personal computer application, version 1.05.00 and later (STcontroller compatible with Windows(R) version 7 and later)
Dimensions / Weights (Overall)
4.3 inches wide (10.9 cm)
2.1 inches high (5.4 cm)
5.1 inches deep (13.0 cm)
Deployment: intended for tabletop applications
Weight: 1.2 pounds (0.55 kg)
USER MANUAL
No user manual available for download